986 Wheel Loader
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
Share
Overview
Cat® Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The 986 builds upon this legacy of durability, performance, safety, operator comfort, serviceability and sustainability.
-
Engine Power - ISO 14396:2002
335 kW -
Engine Model
Cat® C15 -
Peak Power Speed
1600 -
Gross Power - SAE J1995:2014
340 kW -
Net Power - SAE J1349:2011
278 kW -
Rated Speed
2000 -
Rated Speed - 2,000 rpm - EEC 80/1269
278 kW -
Rated Speed - 2,000 rpm - ISO 9249
278 kW -
Bore
137 mm -
Stroke
171.5 mm -
Displacement
15.2 l -
Peak Torque (1,200 rpm) - SAE J1995:2014
2411 N·m -
Torque Rise
16% -
Note (1)
Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA. -
Note (2)
Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator. -
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
Note (1)
* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.” -
Note (2)
** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701. -
Note (3)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
Note (4)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed. -
Note (5)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. -
Wheel Base
3810 mm -
Wheel Base
3810 mm -
Wheel Base
3810 mm -
Wheel Base
3810 mm
-
Operating Weight - Standard
44355 kg
-
Bucket Capacity Range
5.0-10.3 m³ (6.5-13.5 yd³) -
Operating Weight - High Lift
47175 kg -
Rated Payload - Standard (Quarry Face)
10 t -
Rated Payload - Loose Material (Standard)
12.7 t -
Rated Payload - High Lift (Quarry Face)
10 t -
Rated Payload - Loose Material (High Lift)
11 t -
Cat Truck Match - Standard
770/735/740/745 -
Cat Truck Match - High Lift
772/773
-
Transmission Type
Cat planetary power shift -
Forward - 1
7.3 km/h -
Forward - 2
12.2 km/h -
Direct Drive - Forward 2
12.7 km/h -
Direct Drive - Forward 3
22 km/h -
Direct Drive - Forward 4
39 km/h -
Reverse - 1
7.6 km/h -
Reverse - 2
13.6 km/h -
Direct Drive - Reverse 2
14.1 km/h -
Direct Drive - Reverse 3
25 km/h -
Direct Drive - Reverse 4
40.8 km/h
-
Lift/Tilt System - Circuit
Load Sense -
Lift/Tilt System - Pump
2 × 110 cc variable displacement -
Relief Valve Setting - Lift/Tilt
27900 kPa -
Lift Cylinder - Bore
190 mm -
Lift Cylinder - Stroke
1138 mm -
Tilt Cylinder - Bore
170 mm -
Tilt Cylinder - Stroke
722 mm
-
Maximum Flow at 2,165 rpm
470 L/min
-
Rack Back
4.5 s -
Dump
3.5 s -
Lower Float Down
4.3 s -
Total Hydraulic Cycle Time
21.3 s
-
Raise
9 s -
Lower
5.2 s
-
Steering System - Circuit
Load Sense -
Steering System - Pump
Piston, variable displacement -
Maximum Flow at 1,400 rpm
200 L/min -
Total Steering Angle
70°
-
Steering Cut Off Pressure
27600 kPa
-
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system contains 1.8 kg (3.9 lb) of refrigerant, which has a CO2 equivalent of 2.574 metric tonnes (2.837 tons).
-
Front
Fixed -
Rear
Trunnion -
Oscillation Angle
±12.5° -
Oscillation Angle - Chain Arrangement
±8.5°
-
Brakes
ISO 3450:2011 -
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
-
Fuel Tank
535 l -
Fuel Tank - Short Lift
481 l -
Cooling Systems
100 l -
Crankcase
34 l -
Diesel Exhaust Fluid Tank
23 l -
Transmission
75 l -
Axle Oil - Differentials and Final Drives - Front
186 l -
Axle Oil - Differentials and Final Drives - Rear
170 l -
Hydraulic System Factory Fill
330 l -
Hydraulic System - Tank Only
130 l
-
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A) -
Machine Sound Power Level (ISO 6395:2008)
113 dB(A) -
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A -
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A) -
Operator Sound Pressure Level (ISO 6396:2008)
74 dB(A) -
Machine Sound Power Level (ISO 6395:2008)
113 dB(A) -
Operator Sound Pressure Level (ISO 6396:2008)*
73 dB(A) -
Machine Sound Power Level (ISO 6395:2008)**
110 dB(A)
-
Ground to Top of ROPS
4100 mm -
Ground to Top of Exhaust Stacks
4060 mm -
Ground to Top of Hood
3270 mm -
Ground to Lower Hitch Clearance
459 mm -
Clearance at Maximum Lift
3079 mm -
Maximum Overall Length
11143 mm -
Ground to Top of ROPS
4100 mm -
Ground to Top of Exhaust Stacks
4060 mm -
Ground to Top of Hood
3270 mm -
Ground to Lower Hitch Clearance
459 mm -
Clearance at Maximum Lift
3538 mm -
Maximum Overall Length
11591 mm -
Ground to Top of ROPS
4100 mm -
Ground to Top of Exhaust Stacks
4060 mm -
Ground to Top of Hood
3270 mm -
Ground to Lower Hitch Clearance
459 mm -
Reach at Maximum Lift
2437 mm -
Clearance at Maximum Lift
3259 mm -
B-Pin Height at Maximum Lift
4566 mm -
Maximum Overall Height, Bucket Raised
6359 mm -
Rear Axle Center Line to Bumper
3132 mm -
Maximum Overall Length
10671 mm -
Ground to Top of ROPS
4100 mm -
Ground to Top of Exhaust Stacks
4060 mm -
Ground to Top of Hood
3270 mm -
B-Pin Height at Maximum Lift
4566 mm -
Rear Axle Center Line to Bumper
3132 mm -
Maximum Overall Length
10776 mm
-
Ground to Center of Front Axle
978 mm -
Reach - Maximum Lift
2175 mm -
B-Pin Height - Maximum Lift
4912 mm -
Maximum Overall Height - Bucket Raised
6817 mm -
Rear Axle - Centerline to Bumper
3132 mm -
Front Axle Centerline to Bucket Tip
4201 mm -
Ground to Center of Front Axle
978 mm -
Reach - Maximum Lift
2248 mm -
B-Pin Height - Maximum Lift
5371 mm -
Maximum Overall Height - Bucket Raised
7276 mm -
Rear Axle - Centerline to Bumper
3132 mm -
Front Axle Centerline to Bucket Tip
4649 mm -
Front Axle Centerline to Bucket Tip
3729 mm -
Front Axle Centerline to Bucket Tip
3834 mm
-
Ground to Fuel Tank Clearance
691 mm -
Ground to Fuel Tank Clearance
691 mm -
Ground to Fuel Tank Clearance
691 mm -
Ground to Fuel Tank Clearance
691 mm
-
Note
All dimensions are approximate. -
Note
Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket. -
Note
All dimensions are approximate. -
Note
Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
-
Ground to Center of Rear Axle
978 mm -
Ground to Center of Rear Axle
978 mm
Follow Us