D10 Dozer
The Cat® D10 Dozer is innovative by design — developed by a team of experts who follow a design approach that incorporates feedback from the field with industry-leading technologies to deliver a dozer that continues to advance with every model. The new D10 is no exception. It’s more efficient, so it burns less fuel. It’s more serviceable, so you’ll experience less downtime. It’s more durable, so you’ll spend less over its lifetime. And it’s more productive — so you’ll spend less time putting more profitability to your bottom line.
Share
Overview
The Cat® D10 Dozer is innovative by design — developed by a team of experts who follow a design approach that incorporates feedback from the field with industry-leading technologies to deliver a dozer that continues to advance with every model. The new D10 is no exception. It’s more efficient, so it burns less fuel. It’s more serviceable, so you’ll experience less downtime. It’s more durable, so you’ll spend less over its lifetime. And it’s more productive — so you’ll spend less time putting more profitability to your bottom line.
-
Engine Model
Cat® C27 -
Displacement
27 l -
Stroke
152 mm -
Bore
137 mm -
Emissions
U.S. EPA Tier 4 Final/EU Stage V -
Note (1)
*Excludes all fan losses. -
Note (2)
All Engine ratings apply at 1,800 rpm. -
Note (3)
Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). -
Note (4)
Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). -
Note (5)
**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. -
Note (1)
D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. -
Note (2)
D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. -
Note (1)
Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). -
Note (2)
Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). -
Note (3)
Electro-hydraulic pilot valves assist operations of ripper and dozer controls. -
Ground Clearance
725 mm -
Note (1)
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. -
Note (2)
The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. -
Note (3)
The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). -
Note (1)
*Includes grouser height for total dimensions on hard surfaces. -
Note (1)
Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees -
Note (2)
*Does not include hydraulic controls but includes blade cylinders, pusharms. -
Note (3)
**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.
-
Engine Power - Net SAE J1349/ISO 9249** - Forward
449 kW -
Engine Power - Gross SAE J1995* - Forward
471 kW -
Engine Power - Gross SAE J1995* - Reverse
597 kW -
Engine Power - ISO 14396* - Forward
462 kW -
Engine Power - ISO 14396* - Reverse
588 kW -
Engine Power - Net SAE J1349/ISO 9249** - Reverse
564 kW -
Engine Power - Net SAE J1349/ISO 9249** - Forward
450 kW -
Engine Power - Net SAE J1349/ISO 9249** - Reverse
538 kW -
Engine Power - Gross SAE J1995* - Forward
471 kW -
Engine Power - Gross SAE J1995* - Reverse
571 kW -
Engine Power - ISO 14396* - Forward
464 kW -
Engine Power - ISO 14396* - Reverse
564 kW
-
Fuel Tank - Usable Volume
1224 l -
Fuel Tank - Total Volume
1269 l
-
Cooling System Refill – Tier 4 Final Engine
175 l -
Engine Crankcase Sump
103 l -
Power Train - Total Volume
308 l -
Power Train - Refill Volume
283 l -
Track Roller Frames (each)
64 l -
Pivot Shaft Oil
36 l -
Hydraulic System Tank
122 l
-
Final Drives (each)
46 l
-
Operating Weight
70256 kg -
Shipping Weight
50684 kg -
ROPS
Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. -
FOPS
Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
-
Pump Type
Variable displacement piston
-
Pump Output - Implement
424 L/min -
Fan Pump
82 L/min -
Tilt Cylinder Flow - Rod End Flow
424 L/min -
Tilt Cylinder Flow - Head End Flow
240 L/min -
Lift Cylinder Relief Valve Setting
28000 kPa -
Tilt Cylinder Relief Valve Setting
26700 kPa -
Ripper - Lift - Relief Valve Setting
28000 kPa -
Ripper - Pitch - Relief Valve Setting
28000 kPa -
Tank Capacity
122 l -
Cylinder Sizing - Blade Lift - Bore
140 mm -
Cylinder Sizing - Blade Tilt - Bore
210 mm -
Cylinder Sizing - Ripper Shank Lift - Bore
209.6 mm -
Cylinder Sizing - Ripper Shank Angle - Bore
180 mm -
Cylinder Sizing - Blade Lift - Stroke
1653 mm -
Cylinder Sizing - Blade Tilt - Stroke
241 mm -
Cylinder Sizing - Ripper Shank Lift - Stroke
535 mm -
Cylinder Sizing - Ripper Shank Angle - Stroke
660 mm
-
Shoe Type
Extreme Service (ES) -
Width - Shoe
610 mm -
Shoes/Side
44 -
Grouser Height
93 mm -
Pitch
260 mm -
Track Gauge
2550 mm -
Ground Contact Area
4.74 m² -
Track Rollers/Side
8 -
Number of Carrier Rollers
1 per side (optional) -
Track Gauge
2550 mm
-
Length - Track on Ground
3880 mm -
Length - Track on Ground
3880 mm -
Overall Length - Basic Tractor
5324 mm
-
Steering Type
Hydraulically Applied Multiple-Disc Steering Clutch -
Brake Type
Spring Applied Multiple- Disc Brake -
Brake Diameter
392 mm -
Brake Count
10
-
Air ConditioningAir Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.
-
Sound
Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) -
Sound (1)
Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)
-
Note
The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. -
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. -
Note
Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.
-
1.0 Forward
4 km/h -
1.5 Forward
5.4 km/h -
2.0 Forward
7.2 km/h -
2.5 Forward
9.6 km/h -
3.0 Forward
12.5 km/h -
1.0 Reverse
5.2 km/h -
1.5 Reverse
6.7 km/h -
2.0 Reverse
9 km/h -
2.5 Reverse
12.1 km/h -
3.0 Reverse
15.7 km/h -
Transmission Clutch Diameter
431.8 mm
-
Type
Planetary powershift
-
Ground Clearance*
725 mm -
Width - Without Trunnions - 610 mm/24 in ES
3311 mm -
Width - Over Trunnions
3759 mm -
Height - FOPS Cab*
4134 mm -
Height - Top of Stack*
4356 mm -
Height - ROPS/Canopy*
4406 mm -
Length - With SU-Blade
7416 mm -
Length - With U-Blade
7750 mm -
Length - With Single-Shank Ripper
7081 mm -
Length - With Multi-Shank Ripper
7241 mm -
Overall Length - SU-Blade/SS Ripper
9158 mm
-
10SU ABR - Capacity (SAE J1265)
18.5 m³ -
10SU ABR - Width (over end bits)
4940 mm -
10SU ABR - Height
2120 mm -
10SU ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
507.47 mm -
10SU ABR - Digging Depth - Blade Pitch: Nominal
640.87 mm -
10SU ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
764.12 mm -
10SU ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
1680 mm -
10SU ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
1368 mm -
10SU ABR - Ground Clearance - Maximum Tilt LH
Tilt LH1430 mm -
10SU ABR - Ground Clearance - Maximum Tilt RH
1430 mm -
10U ABR - Capacity (SAE J1265)
22 m³ -
10U ABR - Width (over end bits)
5260 mm -
10U ABR - Height
2120 mm -
10U ABR - Digging Depth - Blade Pitch: Full Racked Back (Carry)
507.5 mm -
10U ABR - Digging Depth - Blade Pitch: Nominal
640.9 mm -
10U ABR - Digging Depth - Blade Pitch: Full Pitched Forward (Spread)
764.1 mm -
10U ABR - Ground Clearance - Blade Pitch: Full Racked Back (Carry)
1680 mm -
10U ABR - Ground Clearance - Blade Pitch: Full Pitched Forward (Spread)
1368 mm -
10U ABR - Ground Clearance - Maximum Tilt LH
1545 mm -
10U ABR - Ground Clearance - Maximum Tilt RH
1545 mm -
10U ABR - Weights - Blade Weight*
10698 kg -
10U ABR - Weights - Total Operating Weight** (with blade and SS ripper)
70256 kg
-
Maximum penetration force * (shank vertical)
219 kN -
Maximum penetration depth (standard tip)
1504 mm -
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole
912 mm -
Maximum penetration force * (shank vertical)
236 kN -
Maximum penetration depth (standard tip)
1988 mm
-
Weight
6445 kg -
Weight
6599 kg
Follow Us