Tr?id=1160200101807817&ev=PageView&noscript=1

995 Wheel Loader

Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.

Overview

Built to the same size as the 994K but offering a higher rated payload, the new Cat® 995 Wheel Loader gives you greater productivity and performance while using less fuel. It offers a one-pass reduction when loading Cat 785, 789 and 793 Mining Trucks — increasing production and efficiency up to 33% when loading the 785, up to 25% when loading the 789, and up to 20% with the 793. The 995 demonstrates 21% higher efficiency and 24% more production than the 994K in equal operating mode thanks to a higher rated payload and 6% increase in hydraulic force. In Enhanced Eco Mode, the 995 demonstrates up to a 30% increase in efficiency and an 11% reduction in hourly fuel consumption versus the 994K in throttle lock mode, which translates to 23% less CO2 per unit of material moved. It also offers a more comfortable operator environment and is infused with new technology features that allow additional gains in efficiency.

  • Engine Model
    Cat® 3516E
  • Emissions
    U.S. EPA Tier 4 Final/EU Stage V or U.S. EPA Tier 1 equivalent
  • Engine Power - ISO 14396
    1377 kW
  • Gross Power - SAE J1995:2014
    1394 kW
  • Net Power - SAE J1349 - Standard Ambient
    1297 kW
  • Net Power - SAE J1349 - High Ambient
    1265 kW
  • Bore
    170 mm
  • Stroke
    215 mm
  • Displacement
    78.1 l
  • Peak Torque - 1,200 rpm - SAE J1995
    11591 N·m
  • Torque Rise
    39%
  • Note (1)
    The power ratings apply when tested under the reference conditions for the specified standard.
  • Note (2)
    The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner and muffler.
  • Note (3)
    The gross power advertised is with the fan at maximum speed.
  • Wheel Base
    6800 mm

  • Operating Weight - Standard
    246651 kg

  • Operating Weight - High Lift
    248421 kg
  • Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
    54.4 t
  • Rated Payload - Standard Lift (Moderate to High Digging Resistance)
    45.3 t
  • Rated Payload - High Lift (Low to Moderate Digging Resistance)
    49.9 t
  • Rated Payload - High Lift (Moderate to High Digging Resistance)
    45.3 t
  • Cat Truck Match - Standard
    785/789
  • Cat Truck Match - High Lift
    789/793/794
  • Bucket Capacity Range
    17.2-43.6 m3 (22.3-57 yd3)

  • Note
    *Please contact your local dealer to determine if your application is suitable for this increased rated payload.
  • Note
    Travel speeds based on 58/85-57 tires.
  • Note
    *Not available on Tier 4 Final/Stage V machines. Not available in all regions.
  • Note
    The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • Note
    The declared sound levels listed above include the addition of both measurement uncertainty and uncertainty due to production variation. Typical measurement uncertainty for this type of machine is 2 dBA in accordance with "ISO 4871". The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
  • Note
    Assumes loaded 58/85-57 tires, tires at a static loaded radius of 1830 mm (6 ft), 596-5330 26 m3 (34 yd3) bucket, 431-0064 HD tips.

  • Transmission Type
    Cat Planetary Power Shift
  • Forward - 1
    7.4 km/h
  • Forward - 2
    12.9 km/h
  • Forward - 3
    21.9 km/h
  • Reverse - 1
    8.1 km/h
  • Reverse - 2
    14.1 km/h
  • Reverse - 3
    24 km/h
  • Direct Drive - Forward 1
    Lock-up disables
  • Direct Drive - Forward 2
    14 km/h
  • Direct Drive - Forward 3
    24.5 km/h
  • Direct Drive - Reverse 1
    Lock-up disables
  • Direct Drive - Reverse 2
    15.5 km/h
  • Direct Drive - Reverse 3
    27 km/h

  • Lift/Tilt System - Circuit
    Positive Flow Control
  • Lift/Tilt System - Pump
    Variable Displacement Piston
  • Relief Valve Setting - Lift/Tilt
    34500 kPa
  • Cylinders, Double Acting - Lift, Bore and Stroke
    370 × 1713 mm (14.6 × 67.4 in)
  • Cylinders, Double Acting - Tilt, Bore and Stroke
    Stroke310 × 1086 mm (12.2 × 42.8 in)
  • Pilot System
    Open Loop and Pressure Reducing

  • Maximum Flow at 1,700 rpm Engine Speed
    2047 L/min

  • Rack Back
    4.9 s
  • Dump
    3.1 s
  • Lower Float Down
    4.2 s

  • Raise
    12.6 s

  • Fuel Tank - Standard
    3240 l
  • Cooling System
    520 l
  • Engine Crankcase
    288 l
  • Transmission
    416 l
  • Differential - Final Drives - Front
    833 l
  • Differential - Final Drives - Rear
    757 l
  • Hydraulic Tank - Implement and Hydraulic Fan
    1022 l
  • Hydraulic Tank - Steering and Braking
    379 l

  • Fuel Tank - With 24 hr Attachment
    5350 l

  • Oil Renewal System (ORS)*
    75.7 l
  • Clearance at Maximum Lift
    6039 mm
  • Dump Angle at Maximum Lift
    –50.0 degrees
  • Ground to Bumper Clearance
    1355 mm
  • Ground to Center of Axles
    1830 mm
  • Ground to Lower Hitch Clearance
    898 mm
  • Ground to Top of Exhaust Stacks
    7067 mm
  • Ground to Top of Hood
    5682 mm
  • Ground to Top of ROPS
    7119 mm
  • Maximum Overall Length
    19693 mm
  • Rack Angle at Maximum Lift
    59.5 degrees
  • Clearance at Maximum Lift
    6896 mm
  • Dump Angle at Maximum Lift
    –50.0 degrees
  • Ground to Bumper Clearance
    1355 mm
  • Ground to Center of Axles
    1830 mm
  • Ground to Lower Hitch Clearance
    898 mm
  • Ground to Top of Exhaust Stacks
    7067 mm
  • Ground to Top of Hood
    5682 mm
  • Ground to Top of ROPS
    7119 mm
  • Maximum Overall Length
    20388 mm
  • Rack Angle at Maximum Lift
    59.4 degrees

  • Front
    Fixed
  • Rear
    Trunnion
  • Oscillation Angle

  • Brakes
    ISO 3450:2011

  • Ambient Capability Hydraulically Driven Demand Fan - Standard
    43 °C
  • Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
    55 °C
  • Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
    53 °C

  • Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
    74 dB(A)
  • Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
    73 dB(A)

  • Machine Sound Level (ISO 6395:2008)
    119 dB(A)
  • Machine Sound Level (ISO 6395:2008)
    117 dB(A)

  • Steering System - Circuit
    Pilot, Load Sensing
  • Steering System - Pump
    Piston, Variable Displacement
  • Total Steering Angle
    80 degrees
  • Steering Cycle Times - Low Idle
    7.6 s
  • Steering Cycle Times - High Idle
    4.3 s

  • B-Pin Height - Maximum Lift
    8800 mm
  • Front Axle Centerline to Bucket Tip
    6688 mm
  • Maximum Overall Height - Bucket Raised
    11966 mm
  • Rack Back Angle - Carry
    47.7 degrees
  • Rack Back Angle - Ground Level
    39.7 degrees
  • Reach - Maximum Lift
    2946 mm
  • Rear Axle - Centerline to Bumper
    6205 mm
  • Width - Over Tires - With Bulge
    5758 mm
  • B-Pin Height - Maximum Lift
    9657 mm
  • Front Axle Centerline to Bucket Tip
    7383 mm
  • Maximum Overall Height - Bucket Raised
    12823 mm
  • Rack Back Angle - Carry
    53.5 degrees
  • Rack Back Angle - Ground Level
    45 degrees
  • Reach - Maximum Lift
    2884 mm
  • Rear Axle - Centerline to Bumper
    6205 mm
  • Width - Over Tires - With Bulge
    5760 mm

  • Tread Width
    4300 mm
Scroll to Top